Kubota M9540, Workshop Manual

Page: 49 / 619

G-30
M8540, M9540, WSM G GENERAL
Cleaning Inner Air Filter (CABIN Model)
1. Remove the knob bolt (2) and pull out the filter (1).
2. Blow air from the direction opposite to the filter’s normal air flow.
Pressure of compressed air must be under 205 kPa (2.1 kgf/cm
2
,
30 psi).
NOTE
Q
• Attach the filter as the illustration.
W1103342
Cleaning Air Filter (CABIN Model)
Q
Fresh Air Filter
1. Remove the knob bolts (3) and pull out the fresh air filter (1).
2. Blow air from the opposite direction to the filter’s normal air flow.
NOTE
Q
• If the filter is very dirty :
Dip the filter in lukewarm water with mild dish washing
detergent.
Move it up and down as well as left and right to loosen dirt.
Rinse the filter with clean water and let it air-dry.
IMPORTANT
Q
• Do not use gasoline, thinner or similar chemicals to clean
the filter as damage to the filter may occur.
• If may also cause an unpleasant odor in the cabin when the
system is used next.
• Do not hit the filter. If the filter becomes deformed, dust may
enter into the air-conditioner, which may cause damage and
malfunction.
W1019336
(1) Inner Air Filter (2) Knob Bolt
(1) Fresh Air Filter
(2) Cover
(3) Knob Bolt a : Air Inlet Port
b : Air Conditioner Air Flow
KiSC issued 09, 2008 A