Kubota M9540, Workshop Manual

Page: 452 / 619

8-S15
M8540, M9540, WSM HYDRAULIC SYSTEM
Draft Floating Range Check
1. Attach the weight (3) of approx. 490 N (50 kgf, 110 lbf) to the end
of the lower links.
2. Attach the test bar (1) to the top link bracket (2).
3. Start the engine and set the speed at maximum speed.
4. Move the draft and position control lever (5), (4) all the way down.
5. Press the test bar (1) downward until the top link bracket (2)
comes in contact with the body.
6. Slowly shift the draft control lever (5) upward to mid way of the lift
arm guide. At this time, the lift arm should rise. Then slowly shift
the draft control lever (5) downward until the lift arms begin to
down, measure the floating range (
L ) of the draft control lever (5)
from the end of the lever guide (4).
7. If floating range ( L ) is not within the factory specification, adjust
the draft control rod.
W1015844
Floating range ( L ) Factory spec.
More than 15.0 mm
0.59 in.
(1) Test Bar
(2) Top Link Bracket
(3) Weight
(4) Position Control Lever
(5) Draft Control Lever L : Floating Range
[A] ROPS Model
[B] CABIN Model
KiSC issued 09, 2008 A