8-S19
M8540, M9540, WSM
HYDRAULIC SYSTEM
[5] OIL COOLER RELIEF VALVE
Operating Pressure of Oil Cooler Relief Valve (ROPS Model)
1. Attach the oil cooler relief valve to a injection nozzle tester with a
relief valve adaptor (refer to “8. SPECIAL TOOLS” at “G.
GENERAL” section).
2. Measure the operating pressure of the oil cooler relief valve (1).
3. If the pressure is not within the factory specifications, replace
relief valve with the new one.
NOTE
Q
• Use specified transmission fluid (refer to “4. LUBRICANTS,
FUEL AND COOLANT” at “G. GENERAL” section) to test
the operating pressure of the oil cooler relief valve (1).
W1031580
Operating Pressure of Oil Cooler Check Valve (CABIN Model)
1. Attach the oil cooler check valve to a injection nozzle tester with
a relief valve adaptor (refer to “8. SPECIAL TOOLS” at “G.
GENERAL” section).
2. Measure the operating pressure of the oil cooler check valve (1).
3. If the pressure is not within the factory specifications, replace
relief valve with the new one.
NOTE
Q
• Use specified transmission fluid (refer to “4. LUBRICANTS,
FUEL AND COOLANT” at “G. GENERAL” section) to test
the operating pressure of the oil cooler relief valve (1).
W1075337
Oil cooler relief valve
operating pressure
Factory spec.
4.4 to 4.9 MPa
45.0 to 50.0 kgf/cm
2
640 to 711 psi
Tightening torque
Oil cooler relief valve
retaining nut
49.0 to 68.6 N·m
5.0 to 7.0 kgf·m
36.2 to 50.6 lbf·ft
(1) Oil Cooler Relief Valve
Oil cooler check valve
operating pressure
Factory spec.
Approx. 343.2 kPa
3.5 kgf/cm
2
49.8 psi
Tightening torque
Oil cooler check valve
retaining nut
49.0 to 68.6 N·m
5.0 to 7.0 kgf·m
36.2 to 50.6 lbf·ft
(1) Oil Cooler Check Valve
KiSC issued 09, 2008 A
Summary of Contents for M9540
