Kubota M9540, Workshop Manual, Page: 289 / 619

3-S45
M8540, M9540, WSM TRANSMISSION
[8] SHIFT COVER
Speed Change Lever
1. Set the main change shift lever (3) to the neutral position.
2. Set the range shift lever (2) to the
H position (A) .
3. Remove the shift cover (1) mounting screws.
4. Screw in the M8 x 1.25 mm screw (or M14 x Pitch 1.5 mm screw)
to threaded hole (a) for jack up the shift cover (1).
5. Remove the shift cover (1) gently.
(When reassembling)
• Set the all main change shift fork (4), (6) and (7) to “neutral”
position and shifters in the transmission on neutral position, and
range shift fork (5) and shifter in the transmission on
H side
(forward).
• Apply liquid gaskets (Three Bond 1206C or equivalent) to joint
face.
W1017076
Tightening torque
Speed change cover
mounting screw
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 lbf·ft
(1) Shift Cover
(2) Range Shift Lever
(3) Main Change Shift Lever
(4) 1st-2nd Shift Fork
(5) Range Shift Fork
(6) 3rd-4th Shift Fork
(7) 5th-6th Shift Fork [A] ROPS Model
[B] CABIN Model
(a) Threaded Hole for Jack Up
(A) H Position
(B) L Position
(C) Creep Position
(D) 1st, 3rd or 5th Position
(E) Neutral Position
(F) 2nd, 4th or 6th Position
KiSC issued 09, 2008 A