Korg MMT RADIAS, Owner'S Manual, Page: 95 / 176

3. Synth Parameters
89
OctSaw
Cuts the portion of the waveform above the threshold
level and moves it within the limits to the inverse posi-
tion upward or downward.
MultiTri
Sending a sawtooth wave through this will produce a
triangle wave.
MultiSin
Sending a sawtooth wave through this will produce a
sine wave.
SubOSCSaw, SubOSCSqu, SubOSCTri, SubOSCSin
The selected waveform will sound one octave below os-
cillator 1. “Depth” adjusts the mix amount relative to os-
cillator 1.
Pickup
This simulates an electromagnetic pickup. “Depth” ad-
justs the depth.
The above illustration for Pickup shows differenc-
es in the output waveform when a sine wave at C4
is input. The transformation will vary depending
on the input pitch.
Lvl Boost
Boosts the output level. “Depth” adjusts the amount of
boost.
This may produce high output volumes than other
wave shape types.
7: PunchLvl (Punch Level) [000…127]
Creates a more “snappy” attack by adjusting the
amount of pulse waveform that is added to the oscillator
output only during the attack. Increasing this value will
emphasize the attack.
If the attack is slowed down by the EG etc., this
will have no effect.
8: KeyTrack (Keyboard Track) [–63…+63]
Specifies how keyboard tracking will affect the volume.
With positive (+) settings, the volume will increase as
you play upward from the C4 key, and decrease as you
play downward.
With negative (–) settings, the volume will decrease as
you play upward from the C4 key, and increase as you
play downward.
If this value is 0, keyboard tracking will not affect the
volume.
Keyboard tracking works according to the pitch as
controlled by pitch bend, transpose, and modula-
tion sequencer. It does not reflect pitch changes
produced by vibrato or virtual patching.
P09 EG (Envelope Generator)
These are the parameters for the EGs (Envelope Genera-
tors), which applies time-varying change to the filter or
amp. EG1 is internally connected as the envelope source
that controls the cutoff frequency of filter 1 and filter 2.
EG2 is internally connected as the envelope source that
controls the volume of the amp.
EG3 is an internal parameter only; there are no
knobs for it on the front panel.
P09–1…3: EG 1…3
Depth: 000 Depth: 064
Depth: 127
Depth: 000 Depth: 064
Depth: 127
Depth: 000 Depth: 064 Depth: 127
Depth: 000 Depth: 064 Depth: 127
Depth: 000 Depth: 064 Depth: 127
Depth: 000 Depth: 064
Depth: 127
Sustain level
0
Attack time
Attack level
Decay time
Release time
Time
Note on
Note off
Level