3. Synth Parameters
95
0: Load (Load Template)
[001…128]
Here you can load an insert effect template. Use the cur-
sor [
π
/
√
] button to move the cursor, and turn the
[PROGRAM/VALUE] dial to load the template.
Be aware that when a template is loaded, any ef-
fect parameters that you had been editing will be
overwritten.
In addition to the templates built into the RADI-
AS
, settings you yourself create can also be saved
as templates. For more about templates refer to
p.33 “Loading other timbre sounds/The Template
function.”
1: IFX ON/OFF
ON
[OFF, ON]
Switches the insert effect selected by the [FX1-FX2] but-
ton on/off. The button will light if the effect is on.
2: Type (Effect Type)
[No Effect, St.Compressor…TalkingMod(W)]
Selects the effect type used by the insert effect. For de-
tails on the available types, refer to p.121 “Effect guide.”
3: Edit1
EDIT 1
4: Edit2
EDIT 2
Here you can assign effect parameters to the front panel
INSERT FX [EDIT1] knob and [EDIT2] knob.
The effect parameters that can be assigned will depend
on the effect type. Refer to p.121 “Effect guide.”
5: Effect Parameter
Here you can edit the parameters of the effect selected
by “Type.”
The number, type, and function of the parameters will
depend on the effect type. For details on the parameters,
refer to p.121 “Effect guide.”
P13–4: MFX (Master Effect)
These are the master effect parameters.
The master effect applies to the mixed sound of all tim-
bres, and is typically used to apply a spatial-type effect
such as reverb to add final touches to the overall sound.
The output of each timbre is sent through EQ and the in-
sert effects, and then combined and input to the master
effect. The output of the master effect is sent from the
MAIN OUT jacks.
The settings in this page are common to all tim-
bres, regardless of the timbre that is selected by the
front panel TIMBRE SELECT [1]–[4] buttons.
The master effect is not applied to the Ind Out out-
puts.
0: Load (Load Template)
[001…128]
Here you can load a master effect template. Use the cur-
sor [
π
/
√
] button to move the cursor, and turn the
[PROGRAM/VALUE] dial to load the template.
Be aware that when a template is loaded, any ef-
fect parameters that you had been editing will be
overwritten.
In addition to the templates built into the RADI-
AS
, settings you yourself create can also be saved
as templates. For more about templates refer to
p.33 “Loading other timbre sounds/The Template
function.”
1: MFX ON/OFF
ON
[OFF, ON]
Switches the master effect on/off. The button will light
if the effect is on.
2: Type (Effect Type)
[No Effect, St.Compressor…Talking Mod]
Selects the effect type used by the master effect. For de-
tails on the available types, refer to p.121 “Effect guide.”
3: Edit
EDIT
Assigns a master effect parameter to the front panel
MASTER FX [EDIT] knob.
The parameters that can be assigned will depend on the
effect type. Refer to p.121 “Effect guide.”
4: Effect Parameter
Here you can edit the parameters of the effect selected
by “Type.”
The number, type, and function of the parameters will
depend on the effect type. For details on the parameters,
refer to p.121 “Effect guide.”
Summary of Contents for MMT RADIAS
