Korg MMT RADIAS, Owner'S Manual, Page: 116 / 176

Program parameters
110
MakeMFxTemp
Creates a template using master effect settings of the
currently selected program.
Use “Edit” to select MakeMFxTemp, use “Source” to se-
lect the master effect, use “Dest” to select the save-desti-
nation, use “Name” to specify the name, change “Sure?”
to “Press [YES],” and then press the [EDIT/YES] button.
(
☞
p.108 “MakeTemplate”)
NameMFxTemp
Edits the name of a master effect template.
Use “Edit” to select NameMFxTemp, use “Dest” to se-
lect the template number, use “Name” to specify the
name, change “Sure?” to “Press [YES],” and then press
the [EDIT/YES] button. (
☞
p.108 “NameTemplate”)
P16–5: ARP (Arpeggiator/Step Seq Utility)
1: Edit [InitArpStep…SwapStepSeq]
Select the utility function you want to use.
InitArpStep
Initializes the arpeggio settings of the currently selected
program.
Use “Edit” to select InitArpStep, change “Sure?” to
“Press [YES],” and then press the [EDIT/YES] button.
(
☞
p.107 “InitPROG”)
CopyArpStep
Copies the arpeggio settings of another program to the
arpeggio settings of the currently selected program.
Use “Edit” to select CopyArpStep, use “Source” to select
the copy-source program, change “Sure?” to “Press
[YES],” and then press the [EDIT/YES] button. (
☞
p.107
“CopyVOCODER”)
InitStepSeq
Initializes the step sequencer settings of the currently se-
lected program.
Use “Edit” to select InitStepSeq, use “Dest” to select the
step sequencer you want to initialize, change “Sure?” to
“Press [YES],” and then press the [EDIT/YES] button.
(
☞
p.108 “InitModSeq”)
CopyStepSeq
Copies step sequencer settings from another program to
the step sequencer settings of the currently selected pro-
gram.
Use “Edit” to select CopyStepSeq, use “Source” to select
the copy-source program and step sequencer, use
“Dest” to select the copy-destination step sequencer,
change “Sure?” to “Press [YES],” and then press the
[EDIT/YES] button. (
☞
p.109 “CopyModSeq”)
SwapStepSeq
Exchanges the step sequence 1 and step sequence 2 of
the currently selected program.
1
Use “Edit” to select SwapStepSeq.
“Source” and “Dest” will indicate the exchange-
source and exchange-destination step sequencers.
2
Change “Sure?” to “Press [YES],” and then press
the [EDIT/YES] button.
“Sure?” will indicate Completed; the step
sequencer data has been exchanged.
3
Press the [EXIT/NO] button.
You will return to the previous screen.