Korg MMT RADIAS, Owner'S Manual, Page: 37 / 176

Basic editing procedure
31
Selecting and editing a parameter
1
Use the cursor buttons to select the parameter you
want to edit.
When you press one of the cursor button, the cursor
will move to the next parameter, and it will be high-
lighted in the display.
If there are numerous parameters, a
▼
symbol is shown
at the right edge of the page, indicating that you can
access additional parameters below those shown in the
screen by scrolling. As you press the cursor [
†
/
®
] but-
ton to move the cursor downward, the additional
parameters will appear. When the cursor no longer moves when you press the cursor [
†
/
®
] but-
ton, you have reached the last parameter of that page.
In some cases, the setting of one parameter may affect the number or content of other parameters
in the page. A
symbol is shown in front of parameters that are affected by another parameter in
this way. For example in the P04–1: VOICE – VOICE tab page if you change “Assign” from Poly to
Mono, the additional parameters “Priority” and “Trigger” will appear.
Changing a value
1
Use the front panel knobs, buttons, or the [PROGRAM/VALUE] dial to
change a value.
In generally, you will use the front panel knobs and buttons.
You can use the [PROGRAM/VALUE] dial if there is no knob or button for
that parameter, or if you want to make fine adjustments to the value. Turn-
ing the dial will increment or decrement the value in steps of one.
You will also use the [PROGRAM/VALUE] dial to specify a program when
writing a program, and when entering a name for a program.
If the Global mode P02: MEMORY page “PageJump” setting is On, operating
a knob or button in the Program Edit mode will automatically cause the dis-
play for that parameter to appear. With the factory settings this is turned On (
☞
p.115
“PageJump”).
Returning to the Program Play mode
Press the [EXIT/NO] button or the [PROGRAM] button.
You will return to the Program Play mode.