Korg MMT RADIAS, Owner'S Manual, Page: 114 / 176

Program parameters
108
SwapTIMBRE
Exchanges the settings of the timbre selected by “TIM-
BRE SELECT” with the settings of a different timbre
used in the same program.
1
Use “Edit” to select SwapTIMBRE.
2
Use “Source” to select the swap-destination tim-
bre.
“Dest” indicates the swap-source timbre.
3
Change “Sure?” to “Press [YES],” and then press
the [EDIT/YES] button.
“Sure?” will indicate Completed; the timbre set-
tings have been swapped.
4
Press the [EXIT/NO] button.
You will return to the previous screen.
MakeTemplate
Creates a template using the settings of the timbre se-
lected by “TIMBRE SELECT.”
1
Use “Edit” to select MakeTemplate.
“Source” indicates the timbre that will be saved as
a template.
2
Use “Dest” to select the template number (001–
128) in which the template will be saved.
3
Use “Name” to enter a name for the template
that will be saved.
You can enter a name of up to twelve characters.
Use the cursor buttons to select the character you
want to edit, and use the [PROGRAM/VALUE]
dial to specify a character.
4
Change “Sure?” to “Press [YES],” and then press
the [EDIT/YES] button.
“Sure?” will indicate Completed; the template has
been saved.
5
Press the [EXIT/NO] button.
You will return to the previous screen.
NameTemplate
Edits the name of a template.
1
Use “Edit” to select NameTemplate.
2
Use “Dest” to select the template number (001–
128) whose name you want to edit.
3
Use “Name” to enter a name for the template.
You can enter a name of up to twelve characters.
Use the cursor buttons to select the character you
want to edit, and use the [PROGRAM/VALUE]
dial to specify a character.
4
Change “Sure?” to “Press [YES],” and then press
the [EDIT/YES] button.
“Sure?” will indicate Completed; the edited tem-
plate name has been applied.
5
Press the [EXIT/NO] button.
You will return to the previous screen.
P16–3: MOD (Mod Seq Utility)
These are the utility functions for the modulation se-
quencer.
1: Edit [InitModSeq…SwapModSeq]
Select the utility function you want to use.
InitModSeq
Initializes modulation sequencer settings of the current-
ly selected timbre.
1
Use “Edit” to select InitModSeq.
2
Use “Dest” to select the modulation
sequencer(s) you want to initialize.
If you select MOD1, MOD2, or MOD3 and then
execute the Initialize function, only the selected
modulation sequencer will be initialized.
Tab page Parameter Value
MOD1: P12: MOD SEQ – SEQ1 “Knob” None
MOD2: P12: MOD SEQ – SEQ2 “Motion” Smooth
MOD3: P12: MOD SEQ – SEQ3 “Value” 0