Korg MMT RADIAS, Owner'S Manual, Page: 149 / 176

Effect parameters
143
Dry/Wet [Dry, 99:1…1:99, Wet]
Sets the balance between the effect and dry sounds.
VoiceCtrl (Voice Control)
[Bottom, –62…–01, Center, +01…+62, Top]
Voice pattern control.
Vo Top (Voice Top) [A, I, U, E, O]
Selects a vowel sound at the top end of control.
Vo Center (Voice Center) [A, I, U, E, O]
Selects a vowel sound in the center of control.
Vo Bottom (Voice Bottom) [A, I, U, E, O]
Selects a vowel sound at the bottom end of control.
Example: If you set “Vo Top” to A, “Vo Center” to I, and
“Vo Bottom” to U.
When “Mod Int”=+63, the vowel sound will change
through “Aaa” (Voice Top)
➝
“Eee” (Voice Center)
➝
“Uuu” (Voice Bottom) according to the value of the
modulation source.
When “Mod Int”=–63, the vowel sound will change
through “Uuu” (Voice Bottom)
➝
“Eee” (Voice Center)
➝
“Aaa” (Voice Top) according to the value of the mod-
ulation source.
When “Mod Int”=0, the vowel sound is fixed at “Eee”
(Voice Center).
Resonance [000…127]
Sets the intensity of resonance for the voice pattern. A
larger value will add more character to the sound.
Drive [000…127]
Sets the degree of distortion.
Mod Src (Modulation Source) [Auto, LFO, Ctrl]
Selects the modulation source.
Mod Int (Modulation Intensity) [–63…+63]
Sets the depth of modulation produced by the modula-
tion source.
Response (Mod Response) [000…127]
Adjusts the response to the modulation effect. A setting
of 0 produces a slow response.
Env Sens (Envelope Sensitivity) [000…127]
When “Mod Src” is Auto, adjusts the sensitivity of auto
operation.
Env Shape (Envelope Shape) [–63…+63]
When “Mod Src” is Auto, specifies the sweep curve.
TempoSync (LFO Tempo Sync) [Off, On]
Specifies whether the LFO cycle will be synchronized
with the tempo specified by the [TEMPO] knob or MIDI
clock.
☞
p.125 “TempoSync (LFO Tempo Sync)”
LFO Freq (LFO Frequency) [0.01…100.0Hz]
Sets the LFO speed.
☞
p.125 “LFO Freq (LFO Frequency)”
Sync Note (LFO Sync Note) [8/1…1/64]
Sets the LFO frequency as a proportion of the tempo set
by the [TEMPO] knob. This parameter will be displayed
and can be set if “TempoSync” is On.
☞
p.125 “Sync Note (LFO Sync Note)”
LFO Wave (LFO Waveform) [Saw, Squ, Tri, Sin, S&H]
Selects the LFO waveform.
☞
p.125 “LFO Wave (LFO Waveform)”
LFO Shape [–63…+63]
☞
p.125 “LFO Shape”
Key Sync (LFO KeySync) [Off, Timbre]
Specifies whether the LFO will be reset by note-on.
☞
p.125 “Key Sync (LFO KeySync)”
InitPhase (LFO Init Phase) [000…180°]
Sets the starting location of the waveform. This parame-
ter will be displayed and can be set if “Key Sync” is Tim-
bre.
☞
p.125 “InitPhase (LFO Init Phase)”
Ctrl Src (Control Source) [Off, Velocity…MIDI5]
Selects the control source. The selected source will con-
trol the filter. This parameter will be displayed and can
be set if “Mod Src” is Ctrl.
☞
p.125 “Ctrl Src (Control Source)”
+ Max 0
+ Max
+ Max
- Max
Voice Bottom
Voice Center
Voice Top
U
I
A A
O
E
Mod Int = +63
Mod Int = +32
Mod Int = 0
Mod Int = –63
+ Max 0
- Max
Talking Modulator Control
Ctrl Src = P.Bend
Ctrl Src = P.Bend