Korg MMT RADIAS, Owner'S Manual, Page: 47 / 176

Program parameter editing
41
Timbre output settings
Timbre output settings
1
Use the AMP [LEVEL] knob to adjust the volume of the timbre.
2
Use the AMP [PAN] knob to adjust the panning (position in the stereo field) of
the timbre.
If this knob is in the center position (CNT), the sound will be sent equally from the
left and right outputs (center).
Applying Drive or Wave Shaping
1
Use the [DRIVE/WS] button to select Drive or Wave Shaping.
If you select Drive, the DRIVE LED will light. If you select Wave Shaping, the WS
LED will light.
2
Turn the [DEPTH] knob.
Turning the knob toward the right (increasing the value) will increase the effect.
Using note number (key position) to affect the volume
1
Go to the P08: AMP page.
2
Use “Key Track” to specify how the note number, or
the key’s position on the keyboard will affect the vol-
ume.
With positive (+) settings, the volume will increase as
you play above the C4 note and decrease as you play
below it.
With positive (–) settings, the volume will decrease as
you play above the C4 note and increase as you play
below it.
Creating time-varying change in the volume (EG 2)
EG2 applies time-varying change to the AMP “Level.”
You can edit the virtual patching so that EG2 will apply modulation to other parameters as well.
If you want to use the front panel knobs to adjust the EG2 parameters, use the MOD SEQUENCER
[SELECT] button to make the EDIT indicator light.
Envelope settings for volume change
1
Use the EG 2 [ATTACK] knob to adjust the time required to arrive at full volume after the key
is pressed.
Turn the knob toward the right (increase the value) to make the volume change more slowly, or
turn it toward the left (decrease the value) to make the volume change more quickly.
2
Use the EG 2 [DECAY] knob to adjust the time over which the volume falls from its peak level
to the sustained level.
Turn the knob toward the right (increase the value) to make the volume change more slowly until
it reaches a steady volume (if sustained).