Editing
32
Compare function
While editing a program, you can compare the edits you have made to the original program or timbre.
1
Press the [COMPARE] button.
The display will indicate “Compare.”
Play the keyboard to hear the sound as it was before
you began editing it.
You can’t operate the knobs or buttons in the “compare”
state.
2
Press the [EXIT/NO] button.
The display will return to its previous state. When you
play the keyboard you will once again hear the edits you have already made, and you can con-
tinue editing.
Saving an edited program
When editing a sound, you need to save the changes you have made if you want to keep them. If you don’t
save your edits, they will be lost the next time you select another program, load a template, or turn the RA-
DIAS
off. If you want to keep your changes, you must use the Write operation.
In order to write data, the Global mode P02: MEMORY page “Protect” setting must be Off. From
the factory, this setting is On (
Programs can be written while in the Program Play mode or the Program Edit mode, drum kits or drum in-
struments can be written in the Drum Play mode or the Drum Edit mode, and global parameters can be writ-
ten in the Global mode.
1
In the Program Play mode or the Program Edit mode,
press the [WRITE] button.
The “Write dialogue” dialog box will appear.
2
Specify the write-destination program number in the
“To” field.
3
Press the [WRITE] button or the [EDIT/YES] button to
execute the Write operation.
The data will be written, and you will return to the
mode in which you were.
If you decide to cancel the Write operation, press the [EXIT/NO] button.
Never turn off the power while data is being written. The data may be damaged if you do so.
You can use the cursor [
π
/
√
] button to select “Write,” and then choose one of the following three
types of content to write.
Program: Save the program.
Formant: Save the formant motion data.
Prg&Frmnt: Save both the program and the formant motion data.
If there is no newly recorded formant option data (
p.58 “Recording formant motion data”), the
“Write” field will show Program. If there is newly recorded formant motion data, “Write” will
show Prg&Frmnt.
Summary of Contents for MMT RADIAS
