Korg MMT RADIAS, Owner'S Manual, Page: 61 / 176

Program parameter editing
55
4
Use “Trigger” to select whether the notes at that step
will play.
specifies that the notes at that step will play.
– specifies that the notes at that step will not play.
If you change a – step to , the note numbers previ-
ously assigned to that step will be assigned.
In the case of a step to which no notes had previously
been assigned, note numbers will be assigned accord-
ing to the following rules.
• If the timbre to which the step sequencer is assigned is using a drum kit, the DrumKit Inst=01
note number will be assigned.
• If the timbre to which the step sequencer is assigned is not using a drum kit, the C4 note num-
ber will be assigned.
5
Use the cursor to select the note you want to edit, and
use the [PROGRAM/VALUE] dial to edit it.
If you select “–”, the note data will be deleted.
If you play a key while holding down the [EDIT/YES]
button, the corresponding note number will be input.
However, you cannot input multiple notes simulta-
neously using this method.
Up to eight notes can be recorded in each step. Move the
cursor to “–”, and enter the desired note number. These
notes are sounded with priority given to the notes in the order they are selected, starting from the
upper left. Make sure that the notes of greatest musical importance are specified starting from the
upper left.
6
Repeat steps 2–5 to edit other steps.