Korg MMT RADIAS, Owner'S Manual, Page: 124 / 176

Global parameters
118
Also, you must never turn off the power of the
RADIAS
’ during this time.
MIDI dumps and MIDI dump requests from a con-
nected external MIDI device will not be received
while recording formant motion data (
☞
p.58).
All Data
All program, drum, global, and template data will be
transmitted.
All PROG
All program data will be transmitted.
1 PROG
Data of only the selected program will be transmitted.
All D-KIT
All drum kit data will be transmitted.
1 D-KIT
Data of only the selected drum kit will be transmitted.
All TMPLT
All template data will be transmitted.
GLOBAL
Global data will be transmitted.
P06 MIDI FILTER
P06–1: MIDI FILTER
1: PROG Chg (Program Change) [x, o]
Specifies whether program change messages will be
transmitted and received.
x (Disable)
Program change messages will not be transmitted or re-
ceived.
o (Enable)
Program change messages will be transmitted and re-
ceived.
2: BANK Chg (Bank Change) [x, o]
Specifies whether bank change messages will be trans-
mitted and received.
x (Disable)
Bank change messages will not be transmitted or re-
ceived.
o (Enable)
Bank change messages will be transmitted and received.
3: Ctrl Chg (Control Change) [x, o]
Specifies whether control change messages will be
transmitted and received.
x (Disable)
Control change messages will not be transmitted or re-
ceived.
o (Enable)
Control change messages will be transmitted and re-
ceived.
4: PitchBend [x, o]
Specifies whether pitch bend messages will be transmit-
ted and received.
x (Disable)
Pitch bend messages will not be transmitted or received.
o (Enable)
Pitch bend messages will be transmitted and received.
5: SystemEx (System Exclusive) [x, o]
Specifies whether MIDI system exclusive messages will
be transmitted and received.
x (Disable)
MIDI system exclusive messages will not be transmitted
or received.
o (Enable)
MIDI system exclusive messages will be transmitted
and received.
P07 MIDI MAP
P07–1 : MIDI MAP [CC#] (Control Change)
Here you can assign MIDI control change numbers
(CC#) to each of the front panel knobs and buttons.
When you operate a knob or button, the assigned con-
trol change will be transmitted.
Dumped
data
Data size
(bytes)
Time required (seconds)
All Data 681842 (Max) approximately 10 minutes
All PROG 525824 approximately 7 minutes
1 PROG 2054 approximately 1 second
All D-KIT 63040 approximately 1 minutes
1 D-KIT 1970 approximately 1 second
All TMPLT 70240 approximately 20 seconds
GLOBAL 220356 (Max) approximately 2 minute 30 seconds