Korg MMT RADIAS, Owner'S Manual, Page: 21 / 176

Rear panel
15
Use the DYNAMIC MIC setting if you’re connecting a
mic to the INPUT 2 jack.
Use the LINE setting if you’re connecting a line-level de-
vice such as a synthesizer or audio device to the INPUT
2 jack.
Use the CONDENSER MIC setting if you’re connecting
the headset mic that came with the RADIAS to the
CONDENSER MIC jack.
CONDENSER MIC jack
Connect the mic that came with the RADIAS to this
jack.
Do not connect anything other than the included
mic to the CONDENSER MIC jack.
4. ASSIGNABLE
PEDAL jack
Connect a foot pedal (expression pedal) to this jack.
SWITCH jack
Connect a foot switch to this jack.
5. TO KYBD (TO KEYBOARD) connector
Connect the RADIAS’ dedicated keyboard to this con-
nector.
6. USB connector
Use a USB cable to connect the RADIAS to your com-
puter via this jack. This connection is used to transmit/
receive MIDI data, and to exchange data with the in-
cluded RADIAS Sound Editor software.
7. MIDI
MIDI IN connector
This connector receives MIDI messages. Connect it to
the MIDI OUT connector or MIDI THRU connector of an
external MIDI device.
MIDI OUT connector
This connector transmits MIDI messages. Connect it to
the MIDI IN connector of an external MIDI device.
MIDI THRU connector
Received MIDI messages are passed on without change
from this connector. Use this when you want to send the
same stream of MIDI messages to more than one device.
8. ON/STANDBY
[ON/STANDBY] switch
Turns the power on/off.
9. AC9V
AC9V connector
Connect the included AC/AC power supply here.