Korg MMT RADIAS, Owner'S Manual, Page: 148 / 176

Effect guide
142
Sp Ctrl (Speaker Ctrl. Type) [Switch, Manual]
Selects whether the rotational speed will be controlled
by a switch or manually.
Speed Sw (Speed Switch) [Slow, Fast]
Switches the speed of rotation if “Sp Ctrl” is set to Switch.
If this parameter is assigned to “Edit1,” “Edit2,” or
“Edit,” setting “Sp Ctrl” to Manual will change the
assignment to Speed.
Ctrl Src (Sw. Ctrl. Source) [Off, Velocity…MIDI5]
If “Sp Ctrl” is set to Switch, this selects the modulation
source that will switch the speaker rotation speed be-
tween slow and fast.
☞
p.125 “Ctrl Src (Control Source)”
Ctrl Mode (Sw. Ctrl. Mode) [Toggle, Moment]
If “Sp Ctrl” is set to Switch, this selects the switching
mode of the modulation source that will switch the
speaker rotation speed between slow and fast.
When “CtrlMode” = Toggle, the speed is switched be-
tween slow and fast each time you press the pedal.
Slow/fast will alternate each time the value of the
modulation source exceeds 64.
When “CtrlMode” = Moment, the speed is usually slow.
It becomes fast only when you press the pedal.
When a value for the modulation source is less
than 64, “slow” speed is selected, and when the
value is 64 or higher, “fast” is selected.
Speed [001…127]
If “Sp Ctrl” is set to Manual, this specifies the speaker ro-
tation speed.
If this parameter is assigned to “Edit1,” “Edit2,” or
“Edit,” setting “Sp Ctrl” to Switch will change the
assignment to Speed Sw.
Ctrl Src (Speed Ctrl.Source) [Off, Velocity…MIDI5]
If “Sp Ctrl” is set to Manual, this selects the modulation
source that will control the speaker rotation speed.
☞
p.125 “Ctrl Src (Control Source)”
Ctrl Int (Speed Ctrl.Int) [–63…+63]
If “Sp Ctrl” is set to Manual, this specifies the depth to
which the modulation source will control the speaker
rotation speed.
H/R Bal (Horn/Rotor Balance) [Rotor, 1:99…99:1, Horn]
Sets the level balance between the high-range horn and
low-range rotor.
HornAccel (Horn Acceleration) [000…127]
How quickly the horn rotation speed in the high range
is switched. On a real rotary speaker, the rotation speed
is accelerated or decelerated gradually after you switch
the speed. The “Horn Acceleration” parameter sets the
speed at which the rotation is accelerated or decelerated.
HornRatio [Stop, 0.50…2.00]
Adjusts the (high-range side) horn rotation speed. Stan-
dard value is 1.00. Selecting “Stop” will stop the rota-
tion.
RotrAccel (Rotor Acceleration) [000…127]
Determines how quickly the rotor rotation speed in the
low range is switched.On a real rotary speaker, the rota-
tion speed is accelerated or decelerated gradually after
you switch the speed. The “Horn Acceleration” param-
eter sets the speed at which the rotation is accelerated or
decelerated.
RotrRatio (Rotor Ratio) [Stop, 0.5…2.0]
Adjusts the (low-range side) rotor rotation speed. Stan-
dard value is 1.00. Selecting “Stop” will stop the rota-
tion.
MicDistnc (Mic Distance) [000…127]
Sets the distance between the microphone and rotary
speaker.
Spread [000…127]
Sets the angle of left and right microphones.
Trim [000…127]
Sets the input level.
30. TalkingMod (IFX W-size)
Double Size
Talking Mod (MFX)
This effect adds an unusual character, like a human
voice, to the input signal.
If you want to use this effect as an insert effect, you
must select it for insert effect 1. In this case, you
won’t be able to use insert effect 2.
Mic Spread
Microphone
Microphone
Mic Distance Mic Distance
Rotary Speaker (Top View)
Rotary Speaker - Mic Placement
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Right
Dry / Wet
Dry / Wet
+
Voice Top: A
Voice Center: I
Voice Bottom: U
A - I - U - E - O Talking Modulator
Drive
LFO
Ctrl
Ctrl Src
LFO
Mod Src