Korg MMT RADIAS, Owner'S Manual, Page: 36 / 176

Editing
30
Selecting the timbre to edit
If the program consists of more than one timbre, here’s how to select the timbre you want to edit.
2
Use the TIMBRE SELECT [1]–[4] buttons to select
the timbre you want to edit.
The button for the selected timbre will blink. The
front panel knobs and buttons and the timbre param-
eters shown in the display will apply to the timbre
that is selected.
If you want to edit the vocoder, press the [VOCODER] button.
You can’t select a timbre that’s currently off (a timbre whose button is unlit). To turn on a timbre
that’s currently turned off, hold down the [EXIT/NO] button while selecting the timbre using the
TIMBRE SELECT [1]–[4] buttons. This can also be used to turn any timbre off.
Depending on the Program Edit mode P02–1: COMMON – PROG tab page “PanelEdt” (panel edit)
setting, the timbre you select here may not necessarily match the front panel knobs and buttons
(
☞
p.75 “PanelEdit”).
Selecting pages and tab pages
The Program Edit mode consists of multiple pages. To select a page you can use the PAGE [+][–] buttons or
the 16KEYS [1]–[16].
Press the PAGE [+] or [–] button.
You will step through the pages or tab pages one at a
time.
If a page contains more than one tab page, a
symbol
is shown in the lower right of the page. Press the PAGE
[+] button to step through the tab pages.
Use the 16KEYS [SELECT] button to choose PAGE,
and press a 16KEYS [1]–[16] key.
This method lets you move directly to the page contain-
ing the parameter you want to edit.
The following table shows how the 16KEYS [1]–[16] keys correspond to the various pages. If a
page contains more than one tab page, you can step through the tab pages by repeatedly pressing
the corresponding [1]–[16] key.
[1]–[16] key Page Tab pages
[1] P01: NAME PROG TIMBRE
[2] P02: COMMON PROG DRUM E.F
[3] P03: TIMBRE TMBR OUT ZONE MIDI CC-A CC-B
[4] P04: VOICE VOICE UNISON
[5] P05: PITCH
[6] P06: OSC/MIXER OSC1 OSC2 MIXER
[7] P07: FILTER FILTER1 FILTER2
[8] P08: AMP
[9] P09: EG EG1 EG2 EG3
[10] P10: LFO LFO1 LFO2
[11] P11: PATCH P1 P2 P3 P4 P5 P6
[12] P12: MOD SEQ COMN SEQ1 SEQ2 SEQ3
[13] P13: EQ/FX EQ IFX1 IFX2 MFX
[14] P14: ARPEGGIATOR COMN TRIG STEP
[15] P15: STEP SEQ1/2 COMN TRIG STEP COMN TRIG STEP
[16] P16: UTILITY PROG TMBR MOD FX ARP