Kongsberg Simrad MF90, Installation Manual

Page: 47 / 426

476671/B
45
8 Install the cables between the MF90 system and the relevant peripheral devices.
This is described in the Cable layout and interconnections chapter. Observe the
relevant cable plan, procedures, as well as the general requirements for cabling. For
more information, refer to the end-user documentation provided by the manufacturer.
9 Turn on the MF90 system for the first time, and set it to work.
Note
In order to turn on the MF90 system in a safe and correct manner, the relevant
procedures must be complied to!
10 Do a complete MF90 system test.
The tests are described in Setting to work chapter in this manual. They are also provided
in the Harbour Acceptance Test and the Sea Acceptance Test documents.
11 Create a backup with the system configuration and software installation.
Once the configuration and testing have been finalized, you must back up the
configuration data and software installation. Your backup will then include the
operating system, the MF90 software, as well as all the interface parameters that you
have defined.
Further requirements
Fill in and sign the Installation Remarks form, and send it to the Simrad support department
as specified on the form.
Related topics
Preparations, page 42
Installing the MF90 system hardware units, page 126
Cable layout and interconnections, page 143
Setting to work, page 186
Preparations