Kongsberg Simrad MF90, Installation Manual

Page: 343 / 426

476671/B
341
• Computer mouse
• Computer keyboard
• USB flash drive (Bootable)
• Optionally: USB flash drive (with backup image)
• Optionally: USB hard disk (with backup image)
To restore you need access to the backup files. We recommend that you use the backup you
made after the system installation was completed.
You need the bootable USB flash drive provided with the MF90 system. You can also use
any commercial USB flash drive. It must be formatted as a bootable device by the Acronis
True Image program.
Context
You can restore the image from generic backup image, or from an image created for your
installation.
Note
If you restore your Processor Unit from a generic image, you must change the Windows
license and then activate it before you can use the MF90. You must also reinstall the
MF90 system software. We recommend that you use the backup you made after the system
installation was completed.
The software used is Acronis True Image . This procedure refers to the following software
version:: 20.0.
Procedure
1 Close the MF90 program.
a Select
Power off
to turn off the system.
b In the
Power Off
dialog box, select
Exit to Operating System
to close
the MF90 program.
2 Boot the computer from the USB flash drive.
a Connect a mouse and a computer keyboard to the computer.
b Optionally: Connect the USB hard disk to an available socket on the Processor
Unit.
c Insert the bootable USB flash drive.
d Restart the Processor Unit.
e If necessary: Select boot device: UEFI
Setting to work