Kongsberg Simrad MF90, Installation Manual

Page: 220 / 426

218
476671/B
12 Locate the
Hoist/Lower Switch
(S302). Set the switch to position LOWER .
• Lowering is automatically stopped when the
Lower Limit Switch
is activated.
• If necessary, the transducer can be stopped in any position by setting the
Hoist/Lower
Switch
to STOP .
13 Locate the
Hoist/Lower Switch
(S302). Set the switch to position HOIST .
• Hoisting is automatically stopped when the
Upper Limit Switch
is activated.
• If necessary, the transducer can be stopped in any position by setting the
Hoist/Lower
Switch
to STOP .
14 Repeat the hoist and lower operations to find the best way of securing the transducer
cable.
15 Locate the
Hoist/Lower Switch
(S302). Set the switch to position STOP .
16 Locate the
Motor Protecting Switch
(S301). Press the operating handle down to position
OFF .
Result
Requirements
Results
The lowering and hoisting functionality is operational.
The transducer cable moves freely during lowering and hoisting.
The transducer cable is secured.
Date and signature:
Related topics
Setting to work, page 186
Starting up the hull unit, page 201
Simrad MF90 Installation Manual