Kongsberg Simrad MF90, Installation Manual

Page: 243 / 426

476671/B
241
a On the Operating Panel, press
Power
, and keep it depressed for a few seconds.
The blue indicator light in the button flashes while the Operating Panel establishes
contact with the Processor Unit. When the connection has been made, the blue
indicator light is lit permanently.
b On the Processor Unit, close any programs that are running, and return to the
desktop.
c On the Processor Unit desktop, open folder
SIMRAD-Shortcut
.
d Double-click the URL shortcut to open the Operating Panel configuration page in
the default web browser.
Note
If you have previously changed the IP Address on the Operating Panel, you must
use this address to open the configuration page.
For each Processor Unit that is added:
3 Locate the IP and MAC addresses on the ETH1 Ethernet adapter in the Processor Unit.
The IP and MAC addresses for your Processor Unit are contained in a text file named
IPandMACaddress.txt
. If the text file is missing you must find the information
manually.
Obtain the IP address.
a In the bottom-left corner of your desktop, select the Windows
®
Start
button.
b On the menu, select
Settings
.
c Observe that the
Windows Settings
dialog box opens.
d Select
Network & Internet
.
e Select
Change adapter options
.
f Select the relevant network adapter, then right-click and select
Properties
on the
short-cut menu.
g On the list of connections, select
Internet Protocol 4 (TCP/IPv4)
, and then
Properties
.
h Observe the IP address for the Ethernet adapter.
i Write down the information.
j Close all the dialog boxes.
Obtain the MAC address.
a In the bottom left corner of your desktop, select the looking glass to start a search.
b Type "Command", do the search, and open the
Command Prompt
window.
Setting to work