Kongsberg Simrad MF90, Installation Manual

Page: 226 / 426

224
476671/B
Note
Do not apply too much torque on the bolts, as this may damage the threads.
Related topics
Setting to work, page 186
Initial start-up, page 219
Finalizing the cable connections
As a final preparation before start-up, you must make sure that all electrical connections
have been made.
Procedure
1 Connect all the power cables.
2 Connect the Ethernet cable from the Processor Unit to the Transceiver Unit.
Related topics
Setting to work, page 186
Initial start-up, page 219
Installing the operating software
A dedicated wizard is used to install the software. The Processor Unit is shipped without the
MF90 software installed. The operating system has been modified to make the computer
work with the MF90 system.
Prerequisites
The following specific items are required for this task:
• Personal computer (if applicable)
• Software media (USB flash drive) (included with delivery)
• Software license code (if applicable)
• Computer mouse (Optional)
• Computer keyboard (Optional)
Neither tools nor instruments are required.
Simrad MF90 Installation Manual