Kongsberg Simrad MF90, Installation Manual

Page: 221 / 426

476671/B
219
Initial start-up
Topics
Summary of initial start-up, page 219
Making sure that the operating power is correct, page 220
Making sure that the transducer cannot be accidentally lowered, page 222
Connecting the transducer cables to the Transceiver Unit, page 223
Finalizing the cable connections, page 224
Installing the operating software, page 224
Obtaining and installing a software license for additional functionality, page 226
Selecting hull unit, page 228
Defining the middle position of the transducer, page 229
Summary of initial start-up
Once the visual inspections have been finalized and the hull unit has been started, you can
turn on the entire MF90 system for the first time.
Prerequisites
Before you can set the MF90 system to work, the following prerequisites must be met:
• The system units have all been installed according to the instructions provided.
• All system cables are connected.
• All cable connections are made.
• Correct operating power is available.
• All peripheral devices that shall communicate with the MF90 system are available and
operational.
• All relevant personnel and tools are available.
Context
Some of these tasks may be done while the vessel is in dry dock. However, we assume that
the vessel is set afloat before you do these tasks.
Setting to work