Kongsberg Simrad MF90, Installation Manual

Page: 235 / 426

476671/B
233
j Close all the dialog boxes.
Obtain the MAC address.
a In the bottom left corner of your desktop, select the looking glass to start a search.
b Type "Command", do the search, and open the
Command Prompt
window.
c Type ipconfig /all and press the
Enter
key.
d Observe the "Physical Address" (MAC address) for the relevant Ethernet adapter.
e Write down the information.
f Close the
Command Prompt
window.
Select the adapter that the Operating Panel is connected to. On the MF90 system, the
Ethernet adapter is named Simrad Connect.
Prepare the Operating Panel for use.
2 Make the following preparations.
a Connect the power cable from the Operating Panel to the power outlet on the
uninterruptible power supply (UPS).
b Connect the Ethernet cable from the Processor Unit to the Operating Panel.
Make sure that you use the correct Ethernet socket on the rear side of the Processor
Unit: ETH1
c Connect the keyboard and the mouse to USB sockets on the Processor Unit.
d On the Processor Unit, close any programs that are running, and return to the
desktop.
e On the Operating Panel, press
Power
, and keep it depressed for a few seconds.
The blue indicator light in the button flashes while the Operating Panel establishes
contact with the Processor Unit. When you start the panel for the first time the
interface must be configured to establish this connection. When the connection
has been made, the blue indicator light is lit permanently.
f On the Processor Unit desktop, open folder
SIMRAD-Shortcut
.
g Double-click file
IPandMACaddress.txt
to open it in a text editor.
h Double-click the URL shortcut to open the Operating Panel configuration page in
the default web browser.
i Observe that the Operating Panel configuration page opens on
page 157.237.60.20:5000.
3 Define the configuration parameters.
a Select
SOP Configuration
on the top menu to open the page.
Setting to work