Kongsberg Simrad MF90, Installation Manual

Page: 311 / 426

476671/B
309
Procedure
1 Open the
Setup
menu.
2 On the
Setup
menu, select
Installation
.
Observe that the
Installation
menu opens. This dialog box contains a number of pages
selected from the menu on the left side.
3 On the left side of the
Installation
dialog box, select
Operating Panel
.
4 Select Operating Panel Mk2.
a Under
Rotary Switch Options
, assign one function to each rotary switch on the
Operating Panel.
5 Select Operating Panel Mk3.
a Under
Rotary Switch Options
, assign one
Rotate
function to each rotary switch
on the Operating Panel.
The assigned function is activated when you turn the rotary switch.
b Assign one
Push
function to each rotary switch.
The assigned function is activated when you press the rotary switch.
The following functions can be assigned:
None
No specific functionality is assigned.
Auto Tilt
This is an "on/off" function. When Auto Tilt mode is activated the beam will
automatically change its tilt angle for each transmission ("ping"). The centre
of the tilt sector is defined by the chosen tilt angle just before the
Auto Tilt
mode is started. The chosen tilt sector is shown on the tilt indicator in the
Horizontal view using a shaded background. The sector and step settings
are made using the
Tilt
function on the
Main
menu.
Zoom
Place the cursor anywhere in the view, right-click and select
Zoom
. Only
one zoom level is provided. Select
Zoom
one more time to restore the
original view.
Menu Off
This is an "on/off" function. Unless you need to make frequent changes to
the operating parameters, you may want to hide the menu from the display
presentation. This gives you more space for echo information.
Setting to work