74
Keysight EXG and MXG X-Series Signal Generators User’s Guide
Optimize Performance
Using the Dual Power Meter Display
6.
On the N1912A P–Series Power Meter (
Channel B power sensor
): Connect the N1912A P–
Series Power Meter to the LAN.
7.
Connect the power meter sensor to channel B of the power meter.
8.
Connect the power sensor input to the 50 MHz reference of the power meter.
9.
Press
Channel B Setup
10.
Press
Connection Settings
>
Sockets
11.
Press
IP Address
>
IP address
>
Enter
Figure 4-9
Channel B Power Sensor with IP Address Entered
12.
Press
Return
>
Channel Settings
>
External Power Meter Channel
to B.
It is recommended, but not required to use the channel B on the N1912A.
This provides continuity with the signal generator’s dual display. For this
example, the U2004A has already used up the channel A position on the
signal generator.
The IP address of the power meter should be displayed in the ChB section
of the display.
