Keysight EXG and MXG X-Series Signal Generators User’s Guide
121
Avionics VOR/ILS (Option 302)
Using VOR [VHF Omnidirectional Range] Softkeys
To set or return the VOR subsystem parameters to a default state
This process returns the VOR system parameters to a set of default state
conditions.
1.
Press Aux Fctn > Avionics > VOR
2.
Press More 1 of 2
3.
Press Recall Default Settings
Example of Setting All VOR Parameters
1.
Press Preset to place the signal generator in a known preset state.
2.
Set the VOR carrier frequency.
a.
Press Aux Fctn > Avionics > VOR
b.
Press Carrier Freq Index
(Default value is 1 and corresponds to 108.00 MHz
carrier frequency.)
c.
(Optional) Select a value from 1 to 160 and press Enter
to change to a different carrier frequency.
3.
Set the VOR bearing angle between the VAR signal and the REF signal.
a.
Press Bearing
b.
Press Angle
(Default value is 0.00 deg.)
c.
(Optional) Select a value from 0 to 360 deg and press Enter.
VOR Menu
Parameters
Default State
VOR Mode
OFF
Carrier Freq Index
1
108.00 MHz
Bearing menu
Angle
0.00 Deg
Direction
From
REF/VAR menu
REF/VAR Freq
30.00 Hz
REF Deviation
480.0 Hz
VAR Depth
30.0%
SubCarrier Freq
9.96000 kHz
SubCarrier Depth
30.0%
COM/ID menu
a
a. For information on the COM/ID menu,
