Keysight Technologies N5171B EXG, User Manual

Page: 428 / 473

412 Keysight EXG and MXG X-Series Signal Generators User’s Guide
Multitone and Two-Tone Waveforms (Option 430)
Creating a Custom Two–Tone Waveform
Creating a Custom Two–Tone Waveform
Using the
Two-Tone
menu, you can define, and modify user–defined Two–Tone waveforms. Two–
Tone waveforms are generated by the dual arbitrary waveform generator.
The section
Using Two–Tone Modulation on page 413 teaches you how to perform the following
tasks:
— Creating a Two–Tone Waveform on page 414
— Viewing a Two–Tone Waveform on page 414
— Minimizing Carrier Feedthrough on page 415
— Changing the Alignment of a Two–Tone Waveform on page 416
Creating a Custom Multitone Waveform
Using the
Multitone Setup
table editor, you can define, modify and store user–defined multitone
waveforms. Multitone waveforms are generated by the dual arbitrary waveform generator.
The
Using Multitone Modulation on page 418 teaches you how to perform the following tasks:
— Initializing the Multitone Setup Table Editor on page 418
— Configuring Tone Powers and Tone Phases on page 419
— Removing a Tone on page 419
— Generating the Waveform on page 419
— Configuring the RF Output on page 419