Keysight EXG and MXG X-Series Signal Generators User’s Guide
311
Digital Signal Interface Module (Option 003/004)
Operating the N5102A Module in Input Mode
Selecting the Input Direction
If both Option 003 (output mode) and Option 004 (input mode) are installed, you must select the
input direction.
Press
Data Setup
>
Direction Input Output
to Input and press
Return
.
Choosing the Logic Type and Port Configuration
Figure 10-18
Logic and Port Configuration Softkey Menus
1.
Refer to
. Press the
Logic Type
softkey.
From this menu, choose a logic type.
If only Option 004 is installed, the direction softkey will be unavailable and
the mode will always be input.
Changing the logic type can increase or decrease the signal voltage level.
To avoid damaging the device and/or the N5102A module, ensure that
both are capable of handling the voltage change.
