Keysight Technologies N5171B EXG, User Manual

Page: 201 / 473

185
Keysight X-Series Signal Generators
N5171B/72B/73B EXG and N5181B/82B/83B MXG
User’s Guide
9 Basic Digital Operation (Option 653/655/656/657)
Before using this information, you should be familiar with the basic operation of the signal
generator. If you are not comfortable with functions such as setting power level and frequency, refer
to Chapter 3, “Basic Operation”, on page 39 and familiarize yourself with the information in that
chapter.
The features described in this chapter are available only in vector signal generators with Option 653
or 655 (N5172B) or Option 656 or 657 (N5182B).
— Waveform File Basics on page 187
— Storing, Loading, and Playing a Waveform Segment on page 189
— Waveform Sequences on page 192
— Saving a Waveform’s Settings & Parameters on page 197
— Using Waveform Markers on page 203
— Triggering a Waveform on page 219
— Clipping a Waveform on page 226
— Scaling a Waveform on page 235
— Setting the Baseband Frequency Offset on page 241
— I/Q Modulation on page 245
— I/Q Adjustments on page 249
— I/Q Calibration on page 250
— Using the Equalization Filter on page 252
— Using Finite Impulse Response (FIR) Filters in the Dual ARB Real-Time Modulation Filter on
page 254
— Modifying a FIR Filter Using the FIR Table Editor on page 260
— Setting the Real-Time Modulation Filter on page 263
— Multiple Baseband Generator Synchronization on page 265
— Understanding Option 012 (LO In/Out for Phase Coherency) with Multiple Baseband Generator
Synchronization on page 271