Keysight Technologies N5171B EXG, User Manual

Page: 210 / 473

194 Keysight EXG and MXG X-Series Signal Generators User’s Guide
Basic Digital Operation (Option 653/655/656/657)
Waveform Sequences
3. Name and store the waveform sequence to the
Seq
file catalog:
a. Press More > Name and Store .
b. Enter a file name and press Enter .
See also, “Viewing the Contents of a Sequence” on page 194 and “Setting Marker Points in a
Waveform Segment” on page 210 .
Viewing the Contents of a Sequence
There are two ways to view the contents of a waveform sequence:
Through the Waveform Sequences Softkey
1. Press Mode > Dual ARB > More > Waveform Sequences .
2. Highlight the desired sequence.
3. Press Show Waveform Sequence Contents.
Using the Select Waveform Softkey
1. Press Mode > Dual ARB > Select Waveform .
2. In the
Sequence On
column, highlight the desired waveform sequence.
3. Press Show Waveform Sequence Contents.
Editing a Sequence
When editing a waveform sequence, you can:
— change the number of times each segment or nested sequence plays
— delete segments or nested sequences from the sequence
— add segments or nested sequences to the sequence
— toggle markers on and off (described on
page 215 )
— save changes either to the current waveform sequence or as a new sequence
If you exit the sequence editing menu before saving changes, the changes are lost.
Sequences save to the
Seq
file catalog.
Use the following steps to edit a sequence that has two different segments so that the first
segment repeats 100 times and the second segment repeats 200 times, then save the changes.
If you edit and resave a segment used in a sequence, the sequence does
not automatically update the RMS value in its header. You must select and
update the sequence header information ( page 197 ).