Keysight EXG and MXG X-Series Signal Generators User’s Guide
421
Multitone and Two-Tone Waveforms (Option 430)
Using Multitone Modulation
Recalling a Multitone Waveform
Using this procedure, you learn how to recall a multitone waveform from the signal generator’s
memory catalog.
If you have not created and stored a multitone waveform, complete the steps in the previous
sections,
Creating a Custom Multitone Waveform
on page 420, then preset the signal generator to clear the stored multitone waveform
from volatile ARB memory.
1.
Press
Mode
>
Multitone
.
2.
Press
Load/Store
.
3.
Highlight the desired file (for example,
5TONE
).
4.
Press
Load From Selected File
>
Confirm Load From File
.
5.
Press
Multitone Off On
until On is highlighted.
The firmware generates the multitone waveform in ARB memory. After waveform generation, the
multitone waveform is available to be modulated on the RF output.
For instruction on configuring the RF output, see
