manualshive.com logo in svg

Keysight Technologies N5171B EXG, User Manual

Share
Download
Keysight Technologies N5171B EXG User Manual Download Page 296

 280

 

                                                                    Keysight EXG and MXG X-Series Signal Generators User’s Guide

Basic Digital Operation (Option 653/655/656/657)
Waveform Licensing

Locked MM/DD/YY

The slot is locked and can no longer 

be modified.

The waveform in this slot is licensed 

to this signal generator for 

unlimited playback.

Remaining Trial Time HH:MM

The slot is in a trial period that is 

available for 48 hours that begins 

when a waveform is added.

During the trial period, the 

waveform in this slot can be played, 

cleared, or replaced with another 

waveform.

Lock Required

The trial period for the slot has 

expired but the slot has not been 

locked. 

The slot can be cleared or replaced 

with a different waveform but the 

waveform cannot be played until 

the slot is locked. A trial period is 

no longer available.

Table 9-6 

Waveform Licensing Slot Status Messages

Status Column

Meaning

Notes

Summary of Contents for N5171B EXG


























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands