Keysight EXG and MXG X-Series Signal Generators User’s Guide
73
Optimize Performance
Using the Dual Power Meter Display
Figure 4-6
Running Calibration(s) Bar (Zeroing Sensor)
Figure 4-7
Diagnostic Dialog Box Displayed for U2000 Power Sensor
5.
Press
Return
>
Return
>
Channel A
to On
The current power meter sensor reading should be displayed in the
ChA
portion of the
instrument's display and in the upper right portion of the display under Power Meter. Refer to
.
Figure 4-8
Channel A Power Sensor Displayed on MXG/EXG
The U2000 Series USB Power Sensor, does
not
require a 50 MHz
calibration. If a calibration is attempted with the U2000 Series Power
Sensors, the signal generator displays a message reading:
The U2000 series power sensor does not require a 50 MHz
calibration
.
For details on
each key, use key
help as described
on
For details on
each key, use key
help as described
on
For details on
each key, use key
help as described
on
