Keysight EXG and MXG X-Series Signal Generators User’s Guide
31
Preferences & Enabling Options
Upgrading Firmware
Upgrading Firmware
For information on new firmware releases, go to
http://www.keysight.com/find/upgradeassistant
.
Remote Operation Preferences
For details on operating the signal generator remotely, refer to the
Programming Guide
.
GPIB Address and Remote Language
NOTES
USB is also available. It is not shown in the menu because it requires no configuration.
For details on using the instrument remotely, see the
Programming Guide
.
Select the desired language.
This setting is not persistent and is cleared by performing an
instrument Preset. In most cases, it is best to use
Utility
>
Power
On/Preset
>
Language
for a permanent language change. See
.
For details on each key, use key help as described on
Select On to view the associated SCPI command for a key press.
Select On to place a copy of every subsequent SCPI command
executed in the log.
Select Off to stop logging. Selecting Off does not clear the log.
Press the Clear SCPI Log softkey to clear the log.
