Keysight EXG and MXG X-Series Signal Generators User’s Guide
301
Digital Signal Interface Module (Option 003/004)
Operating the N5102A Module in Output Mode
Press N5102A Interface to access the UI (first-level softkey menu shown in
) that is
used to configure the digital signal interface module. Notice the graphic in the signal generator
display, showing a setup where the N5102A module is generating its own internal clock signal. This
graphic changes to reflect the current clock source selection.
Figure 10-10
N5102A Interface Menu
Choosing the Logic Type and Port Configuration
Figure 10-11
Logic and Port Configuration Softkey Menus
1.
Refer to
. Press the
Logic Type
softkey.
Line is grayed out until the N5102A module interface is turned on
Internal clock going to the DUT
