Keysight Technologies N5171B EXG, User Manual

Page: 429 / 473

Keysight EXG and MXG X-Series Signal Generators User’s Guide 413
Multitone and Two-Tone Waveforms (Option 430)
Using Two–Tone Modulation
Using Two–Tone Modulation
In the following sections, this chapter describes the two–tone mode, which is available only in
Keysight X-Series vector signal generators with Option 430:
— Creating a Two–Tone Waveform on page 414
— Viewing a Two–Tone Waveform on page 414
— Minimizing Carrier Feedthrough on page 415
— Changing the Alignment of a Two–Tone Waveform on page 416
See also: Saving a Waveform’s Settings & Parameters on page 197
Two–Tone Modulation Softkeys
For more information about two–tone waveform characteristics, and the
two–tone standard, download
Application Note 1410
from our website by
going to
http://www.keysight.com
and searching for “AN 1410” in Test &
Measurement.
Becomes active when a change is made to the Freq
Separation or Alignment Softkeys.
Becomes active when Two Tone is
turned On.
Active when Two–
Tone enabled.
For softkey usage,
see
page 188
.
page 342
For details on each key, use key help as described on
page 40
.
page 418
page 350
see
page 188
(Two–Tone’s Arb Setup is similar to the Dual Arb Setup.)
Exceptions :
> No Waveform Runtime Scaling softkey,
> No Multi–BBG Sync Setup softkey, and
> No DAC Over–Range Protection softkey