Keysight EXG and MXG X-Series Signal Generators User’s Guide
27
Preferences & Enabling Options
User Preferences
Display Settings
X-Series signal generators are shipped from the factory with default
display settings. Automated Test Environment (ATE) users may benefit
from display settings other than the default settings. When the signal
generator display is not required to be active for long periods of time,
consider using the Screen Saver Mode to extend the life of the display.
With the brightness set to minimum, the display may be too dark to see
the softkeys. If this happens, use the figure above to locate the brightness
softkey and adjust the value so that you can see the display.
Range: 0 to 100
Range: 1 to 12 hours, in 1 hour increments
Light Only
: turns the display light off, leaving the text visible at a low intensity.
Light & Text
: turns the display light and the text off.
If the display remains unchanged for long periods of time, use this mode to
prevent the text from burning the display.
When on, commands executed through
the remote control bus update the signal
generator display accordingly.
Bright without color
Utility
>
Display
Using Secure Display (Option 006)
For details on each key, use key help
as described on
Dark text on a light
background.
Light text on a dark
background.
