Keysight EXG and MXG X-Series Signal Generators User’s Guide
167
Analog Modulation (Option UNT)
Configuring the LF Output (Option 303)
Figure 6-3
Configure the LF Out Source with FM
Configuring the LF Output with a Function Generator Source
In this example, the function generator is the LF output source.
Configuring the Function Generator as the LF Output Source
1.
Press
Preset
.
2.
Press the
LF Out
hardkey.
3.
Press
LF Out Source
>
Func Gen 1
.
Configuring the Waveform
1.
Press
Setup LF Out Source > LF Out Waveform
>
Sine
.
2.
Press
LF Out Freq
>
500
>
Hz
.
3.
Press
Return
.
This returns you to the top LF Output menu.
Configuring the Low Frequency Output
1.
Press
LF Out Amplitude
>
3
>
V
.
This sets the LF output amplitude to 3 V.
2.
Press
LF Out Off On
.
shows that the LF output is now transmitting a signal using the function
generator that is providing a 3 V sine waveform.
For details on each key, use key help
LF Out using the Int Monitor source (default selection).
FM as the LF Out Source
FM and LF annunciators indicate Frequency Modulation is the LF Out source
