Keysight EXG and MXG X-Series Signal Generators User’s Guide
123
Avionics VOR/ILS (Option 302)
Using VOR [VHF Omnidirectional Range] Softkeys
11.
Set modulation to on.
a.
Press MOD On and verify that the front panel LED is illuminated,
indicating that it is on.
(Default is on).
12.
Set a desired RF power level.
a.
Press Amptd
(Default power level is around -144 dBm, and depends on the signal
generator model being used, so the signal may be very low and hard
to find if you do not specify a high enough power level.)
b.
Select a value from -20 dBm to -40 dBm.
13.
Set RF output to on.
a.
Press RF On and verify that the front panel LED is illuminated,
indicating that it is on.
(Default is off).
14.
Verify that all settings are as expected on the signal generator display.
a.
Press Aux Fctn > Avionics > VOR
b.
Review the settings under
VOR Status Information
