298
Keysight EXG and MXG X-Series Signal Generators User’s Guide
Digital Signal Interface Module (Option 003/004)
Connecting the Clock Source and the Device Under Test
3.
Select the break-out board that has the output connector suited for the application.
4.
Refer to
. Connect the break-out board to the Device Interface connector on the
N5102A module.
5.
Connect the device to the break-out board.
If the Device Interface mating connector is used with the device under test,
for the device interface connection and connect the
device to the N5102A module. Then proceed to
Module in Output Mode” on page 300
