IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 505 / 605

Table 28. Intervention-Required Conditions (continued)
Intervention-Required Condition Resolution Actions
Message OP0089
The number of xxxxxxxx constructs has reached the
maximum number allowed (yyy).
Probable Cause
This indicates that the maximum number of constructs
(256) of a particular type has already been reached and
no more can be added.
If the new construct name must be added, another
construct name of the same type must first be deleted.
Message OP0090
The number of xxxxxxxx constructs has exceeded yyy.
The maximum number allowed is zzz.
Probable Cause
This indicates that the number of constructs of a
particular type is nearing the maximum of 256. This
warning is posted when 241 constructs have been
defined for a particular type.
No action required.
Message OP0091
The yyyyy internal LAN switch (HUB) has failed or is
not configured correctly. Call service.
Probable Cause
Unable to ping anything on the network.
Call your service representative.
Message OP0092
A database error has occurred. View help panel for
SQL error code xxxx. Call service.
Probable Cause
Problems were found with the database during
initialization. Operation continues.
Call your service representative.
Message OP0093
NVRAM read failure on LM-A.
Probable Cause
On a dual LM system, the memory used to record the
validity of each LM’s database could not be read from
LM-A. One of the LMs may become active but
switchover capability is disabled.
Call your service representative.
Chapter 8. Problem Determination Procedures
479