IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 558 / 605

Table 51. Status Codes and Status Text (continued)
Operation Status Resolution Actions
Status Code
26
Status Text
Terminated, fewer than four drives available
Probable Cause
The volume could not be exported or imported
because the operation was ended when fewer
than four 3590 drives became available to the
VTS.
Call your service representative.
Status Code
27
Status Text
Volume is not a logical volume
Probable Cause
The Library Manager detected that the volume
in the Export List is not a logical volume.
1.
Examine the first 13 bytes of the status record. They
contain the input from the list file.
2. Correct the input record and retry the operation.
Status Code
28
Status Text
Exported Stacked Volume processing error
Probable Cause
For Import operations, the file on the Exported
Stacked Volume containing the list of logical
volumes stored on the Exported Stacked
Volume could not be read without error.
Suspected media failure, call your service representative.
Status Code
29
Status Text
Orphaned logical volume
Probable Cause
For Export operations, the VTS storage
management code does not recognize the logical
volume volser; therefore, the logical volume
cannot be exported.
Call your service representative.
Status Code
30
Status Text
Logical volume assigned to Insert category
Probable Cause
For Export operations, the logical volume is
assigned currently to the Insert category. A host
has not accepted volumes in the Insert category,
and they cannot be exported.
1. Check host systems attached to the VTS to ensure
that they are processing volumes in the Insert
category.
2. If this check indicates that at least one host is
processing volumes in the Insert category, determine
why the specific volume has not been processed.
532
3494 Tape Library Operator Guide