IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 261 / 605

The Add Message to Transaction Log Command window has the following push
buttons:
OK The entered message text will be added to the transaction log.
Cancel
Close the panel.
Help Display the help panel.
Promote a Command in the Queue
Note:
You can view the Command queue from the Specialist (see “Specialist
Features and Functions” on page 396).
When you select the Promote a command in the queue... option in the Commands
window, the Promote Command window (Figure 141) opens.
The list box in the window shows the commands in the command queue. For each
command, the priority and volser, if applicable, are shown. The commands are
shown in priority order with the highest priority command at the top of the list.
You can select commands that you want to promote by highlighting. If you select a
command for promotion and the command is already in progress, the command is
not promoted. The list box is updated automatically when a command is
promoted.
The Promote Command window has the following push buttons:
Select inserts
Highlights all Insert commands for volumes entered through the
convenience I/O station.
a06c0079
Figure 141. Promote Command Window
Chapter 6. Advanced Operating Procedures
235