IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 341 / 605

To add or modify a key label mapping, enter values in the following fields:
From Key Label
Select the key label to map from. A key label is an alias for the key
(cipher). It is used by the encryption key manager software. The key label
must already exist, however you can use the Open Key Label Entry Panel
button to immediately access the Key Label Entry and EKM IP Information
window and create a new key label. See “LME: Key Label Entry and EKM
IP Information” on page 309
To Key Mode
Select from the following:
v Default Label
: The To Key Label will be ignored.
v Clear Label
: The externally encoded data key (EEDK) is referenced by
the specified key label.
v Hash Label : The EEDK is referenced by a computer value which
corresponds to the public key that is referenced by the specified key
label.
To Key Label
Select the key label to map to. The key label must already exist, however
you can use the Open Key Label Entry Panel button to immediately
access the Key Label Entry and EKM IP Information window and create a
new key label. See “LME: Key Label Entry and EKM IP Information” on
page 309
The ILEP Key Label Mapping window provides the following push buttons:
Add/Modify
Add a new map or update an existing map.
Delete
Delete an existing map.
Figure 197. LME: ILEP Key Label Mapping window
Chapter 6. Advanced Operating Procedures
315
|