IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 393 / 605

Table 18. Operator Intervention Messages and Parameters (OPINT TRAP Type) (continued)
OPINT # Parameter [A] Parameter [B] Parameter [C]
Actual Library Manager OPINT Trap
Message
53 Volser Rack Cell — A volser ( [A] ) with an unknown media type
has been ejected to high-capacity output
facility cell [B] .
54 Volser — — Volser ( [A] ) cannot be removed from the
convenience I/O station.
55 — — — Free storage threshold has been crossed for
VTS z.
56 Volser — — A volser (
[A]
) with an unknown media type
has been left in the convenience input
station.
57 Volser — — A volser (
[A]
) with an unknown media type
has been left in the high-capacity input
station.
58 Volser — — An invalid volser (
[A]
) has been ejected to
the convenience I/O station.
59 Rack Cell — — The cartridge label located at cell [A] has an
unknown media type.
60 Volser — — During an Inventory Update operation,
volser
[A]
was ejected to the convenience
I/O station because there were no free cells.
61 Volser — — During an Inventory Update operation,
volser
[A]
was ejected to the High-Capacity
station because there were no free cells.
62 Accessor — — Power failure on Accessor [A] . Call service.
63 Accessor — — Accessor [A] has failed. Call service.
64 — — — Dual write has failed. A service call is
required.
65 Volser Slot Rack Cell An error occurred for cartridge [A] during
insert from CIO slot
[B]
to cell
[C]
.
66 — — — * VTS Import: Unassigned volumes have
been inserted into the library.
67 Volser — — Eject failed for volser [A] . The Library
Manager initiated this operation.
68 — — — A Library Manager switch has completed.
This switch was initiated by the operator.
69 — — — A Library Manager switch has completed.
This switch was due to an error.
Chapter 6. Advanced Operating Procedures
367