IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 268 / 605

The Delete Logical Volumes window has the following push buttons:
Delete...
Initiates the Delete Logical Volumes operation. You are prompted to
confirm the operation. Select Yes to continue the Delete operation. Select
No to cancel the Delete operation.
Cancel
Closes the Delete Logical Volumes window. If a Delete operation is in
progress, you are prompted to confirm the cancellation. Select Yes to
cancel the Delete operation. Select No to continue with the Delete
operation. You can cancel an in-progress Delete operation at any time.
Help Provides help about the Delete Logical Volumes window.
Eject a VTS/VE Stacked Volume
The Eject A Stacked Volume window (Figure 146 on page 243) allows you to eject a
stacked volume from the 3494 Tape Library. Enter the stacked volume’s volser, then
select the Eject... push button. The list box displays the stacked volumes that are
currently in the process of being ejected.
When an Eject Stacked Volume operation is initiated, a request is sent to the
associated VTS or TS7700 Virtualization Engine to eject the stacked volume. The
VTS or TS7700 Virtualization Engine then copies any active data from the stacked
volume to other stacked volumes. When all active data has been removed, the VTS
or TS7700 Virtualization Engine initiates the eject of the now-empty stacked
volume. This process can take a long time.
Notes:
a06c0332
Figure 145. Delete Logical Volumes Window
242
3494 Tape Library Operator Guide