IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 432 / 605

Perform standalone operations
The Perform standalone operations page is shown in Figure 254 on page 407. This
screen allows the user to perform standalone mount or demount operations.
Controls available for mount operations include:
v A text box for entering the volser
v
A drop-down menu for selecting the device
v A pushbutton to initiate the mount operation
Any existing standalone mounts are listed below the mount operation controls.
Information and controls listed for each standalone mount include:
v
An option button for selecting the standalone mount for a demount operation
v The volser for the standalone mount
v
The device associated with the standalone mount
v The status of the mount operation (e.g.,
″
mount pending
″
)
v
The VTS in use for the mount operation
Beneath the list of standalone mounts is a pushbutton for demounting any selected
mounts. If there are no existing standalone mounts, this pushbutton does not
appear.
After pressing the Mount or Demount pushbuttons, an informational message
appears at the top of the screen informing the user whether or not the operation
completed successfully.
a06c0480
Figure 253. PtP VTS Specialist View Copy Queue Page
406
3494 Tape Library Operator Guide