IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 562 / 605

Table 51. Status Codes and Status Text (continued)
Operation Status Resolution Actions
Status Code
39
Status Text
Unable to Add Construct(s): Library Database Is
Full
Probable Cause
The Library Set Volume attribute command
failed, ERA 29 modifier 19. One or more of the
specified construct names doesn’t exist. The
construct creations actions parameter specified
that the construct is to be created, but the
maximum number of unique names for a
construct (255) has already been reached.
Examine the policy names already defined at the Library
Manager to determine how to adjust existing settings to
best accomodate the policy names of the volumes to be
entered.
Export and Import Messages from Library
During processing of an Export or Import operation, the VTS generates status
messages that indicate the progress of the operation. The message is broadcast to
all hosts attached to the VTS. On MVS, OS/390, or z/OS hosts, the message results
in a console message being written in the following format:
CBR3750I MESSAGE FROM LIBRARY <library-name>: 70 EBCDIC character message
The 70-character message contains the status message, which is defined as follows:
Bytes 0–4 Unique Message Code. The unique message code is further defined
as a single alphabetic character followed by four numeric
characters. The alphabetic character indicates the element or
function in the VTS or 3494 that generated the message. The
numeric characters are a sequential number for a specific element
or function. The element and function codes are defined as follows:
E Export
I Import
Byte 5 Blank character
Bytes 6–69 Status Message Text
Export Status Messages
Table 52. Export Status Messages
Message Code Message Text
E0000 EXPORT OPERATION STARTED FOR EXPORT LIST VOLUME XXXXXX
This message is generated when the VTS starts the Export operation.
536
3494 Tape Library Operator Guide