IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 395 / 605

Table 18. Operator Intervention Messages and Parameters (OPINT TRAP Type) (continued)
OPINT # Parameter [A] Parameter [B] Parameter [C]
Actual Library Manager OPINT Trap
Message
85 — — — Database performance is degraded.
86 — — — Problem detected with Token Ring
connection. Call service.
87 LMA/LMB — — Login is now disabled on
[A]
. Call service.
88 Pool # VTS # — Target Storage Pool [A] is out of stacked
volumes for VTS
[B]
.
89 Constr Max # — The number of
[A]
constructs reached the
maximum number allowed ( [B] ).
90 Constr Curr # Max # The number of [A] constructs exceeded [B] .
The maximum number allowed is
[C]
.
91 LMA/LMB — —
[A]
The internal LAN switch (HUB) failed
or is not configured correctly. Call service.
92 Sqlcode — — A database error occurred. View help panel
for SQL error code
[A]
. Call service.
93 — — — NVRAM read failure on LM-A. Call service.
94 — — — NVRAM write failure on LM-A. Call
service.
95 — — — NVRAM read failure on LM-B. Call service.
96 — — — NVRAM write failure on LM-B. Call service.
97 Opint # — — Unknown intervention for condition
[A]
.
View help panel.
98 LMA/LMB — — [A] The internal LAN switch (HUB) is not
configured correctly.
99 Volser — — Volser
[A]
ejected during recovery
processing.
100 Volser — — A read-only status stacked volume [A] has
been ejected. (VTS z)
101 — — — * A VTS is out of empty stacked volumes.
(VTS z)
102 External Internal — A stacked volume has a label error. Internal:
[B] , External: [A] . (VTS z)
103 — — — A permanent, unrecoverable tape volume
cache error has occurred. (VTS z)
104 Volser — — An orphaned logical volume (
[A]
) has been
found. Call service. (VTS z)
105 — — — A VTS has a CHECK1 failure. (VTS z)
107 Stacked Logical — Logical volume [B] was not fully recovered
from damaged stacked volume [A] . (VTS z)
108 Error Code — — The tape volume cache is degraded. ( [A] )
(VTS z)
109 Volser — — Database restore from volume
[A]
failed.
Attempting to restore from next most recent.
(VTS z)
110 Volser — — Insert of logical volume
[A]
failed during
disaster recovery. (VTS z)
Chapter 6. Advanced Operating Procedures
369